Energy Charting and Metrics Tool (ECAM) Webinar Series Content
The Energy Charting and Metrics (ECAM) Tool Webinar Series is a three-part series of presentations that provide detailed assistance with installation of the tool, show the capabilities of the tool in analyzing metered electrical and end-use data, and familiarize the user with the methodology and functionality of this tool. The first presentation is an introduction to ECAM that walks the user through the installation process, and then provides an example of how to pre-process a simple data file to make it compatible with ECAM input format. The second presentation offers a step-by-step walk-through of how to process interval meter data and generate charts associated with interval meter data. The third presentation offers a step-by-step walk-through for creating PNNL re-tuning charts and a brief overview of how to analyze those charts to identify opportunities to save energy and reduce energy cost. Recordings of the presentations are available here, along with two practice data files used in the presentations. Please note that the webinar series content was based off an older version of ECAM, and does not address the latest additions to ECAM+. Therefore, some charts generated when following the walkthroughs for the PNNL Re-tuning will be different, and the M&V portion of the tool is not addressed. Please see the updated user guide for details on these features.
Webinar Resources for Energy Charting and Metrics Tool (ECAM)
- Part I: Introduction (PDF 4.4MBs and Video 109MBs)
- Part II: ECAM Basics - Step by Step Walk-through (PDF 4.82MBs and Video 131MBs)
- Part III: Creating and Analyzing Re-tuning Charts (PDF 6.55MBs and Video 459MBs)
- Meter Data (CSV 791KB)
- Air Handler Data (CSV 1,158KB)
Return to Energy Charting and Metrics Tools.
If you need assistance with using ECAM Tool please email Danny Taasevigen.